> BASIC 315

BASIC 315 is able to weld fittings such as elbows, tees, Y-branches and flange necks without any additional equipment by simply fixing the clamps’ drag bar.

– A machine body with 4 clamps and 2 hydraulic cylinders with fast non-drip couplings
– An extractable heating plate with DIGITAL DRAGON, high – precision electronic thermo-regulator
– An extractable milling cutter, with safety micro-switch
– An electrohydraulic gearcase, with a clamp opening and closing lever
– A hydraulic hoses with non – drip quick couplings
– Adapters SMARTLocK (RITMO patented) from Ø 90 to 280 mm, Master adapters Ø 250 mm
ON REQUEST (ACCESSORIES)
– Tool for flange necks
– Trolley
– Rollers
– THE INSPECTOR Data-logging

—————————————————–

> DELTA 160 M

DELTA 160 M is a manual butt fusion welder for pipes up to ? 160 mm.
Leading particulars are the restricted weight, minimum overall dimensions and versatility.

Featuring: a machine body, two clamps, an extractable electric milling cutter provided with a safety micro-switch, an extractable heating plate (with an independent thermometer to see the real working temperature and an electronic thermoregulator ìDigital Dragonî with display), and two lateral supports on request.

DELTA 160 M have a locking device clamps – aligner RITMO Patented, that helps the operator to apply the necessary welding force. The welder is equipped with a clamp-aligner system patented by Ritmo, thus allowing the operator to apply the correct welding force.
The Digital Dragon is an high precision electronic thermoregulator (± 1∞ C accuracy) with digital display and regulating buttons. This new system includes Led indicators to check if the machine is working normally (live tension and working temperature), contingent probeís failures and/or temperature anomalies.

ON REQUEST (ACCESSORIES)
– Clampsí inserts from ? 32 to 140 mm
– Lateral support
– Trolley for machine transportation and support
– Rollers

—————————————————–

> DELTA 355 ALL TERRAIN

DELTA 355 ALL TERRAIN is the butt fusion machine that will change your concept of working in job site. ALL TERRAIN is system studied to simplify the movements of the machine in all-terrain conditions, including the loading/unloading of the machine itself from the transportation van/truck.
DELTA 355 ALL TERRAIN is suitable for welding under-pressure pipes (HDPE, PP, PVDF, PB) for the transportation of water, gas and other fluids. It can weld pipes and fittings of diameters between 125 mm and 355 mm.

– Powered by a low-vibration diesel engine, is equipped with front steering wheels and rear traction
– Built according to the International standards ISO 21307 HIGH PRESSURE (the clamps cylinders work with a pressure range that is three times and a half higher than the ISO Low Pressure ones. This enhances productivity, with a welding time saving of 60%)
– The machine body, with the four clamps, can be easily removed from the trolley in order to work in ditches. Also the control panel can be removed to allow the operator to control the welding process out from the ditch
– Fast-locking adapters system SMARTLocK RITMO Patented, thanks to which is possible to change adapters in few seconds
– EASY LIFE system allows the operator to program and control, in a very easy way, all the welding cycle and it also incorporates a Data-logging to record all the working process. The EASY LIFE system can store up to 400 joint reports
– GPS system that allows the localization of the working place
– The milling cutter is mounted on-board
– The heating element can be docked in a comfortable on-board support
– The machine is supplied with two rollers that allow the fast shift of the pipes; the one on the rear of the machine is hydraulic-controlled while the other, in front, is manual

ON REQUEST (ACCESSORIES)

Clampsí inserts from ? 125 to 315 mm
– Tool for flange necks/stub-end holder
– Insertsí transportation box
– Data-logging software and cable

—————————————————–

> DELTA 1000

DELTA 1000 can weld fittings such as elbows, tees, wyes and stub ends. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. The fitting have to be locked in the 4th clamp. Short neck stub ends can be welded with the help of a special tool (on request).

– A machine body with a steel bearing frame
– Clamps and inserts in steel
– Self detaching device: helps removing the heating plate during welding procedure
– An extractable heating plate with separate thermometer for reading the working temperature
– An extractable electric milling cutter with a safety microswitch and overload cutout
– An electrohydraulic gearcase
– An electrical panel with power outlet for the heating plate and crane
– A milling cutter/heating plate support

ON REQUEST (ACCESSORIES)
– Clamps’ inserts from Ø 630 to 900 mm
– Tool for flange necks
– Electrical crane
– Machine body trolley
– Data-logging THE INSPECTOR
– Rollers

—————————————————–

DELTA 1600 is a self-aligning welding machine with hydraulic clamps suitable for welding HDPE pipes for the transport of water and other fluids under pressure, up to ? 1600 mm. The DELTA 1600 is designed in accordance to International standards (UNI 10565, ISO 12176-1). The DELTA 1600 can weld fittings such as elbows, tees, branches and flange necks.

– Robust machine body made of steel
– Steel hydraulic clamping
– Automatic detaching device of heating plate
– Raised platform deck for perfect monitoring of fusion process
– Easy to operate control panel
– INSPECTOR data logger compatible
– On board hydraulic control gearcase
– Pressure adjustment and pressure release valves for easy operations
– Hydraulically controller facer with safety microswitch
– Teflon coated heating plate with indipendent thermometer

ON REQUEST (ACCESSORIES)
– Hydraulic pipe lift rollers
– 4 wheeled trolley with extendable levellers for stabilization
– THE INSPECTOR data logging
– Steel inserts
– Electrical crane

—————————————————–

> Heating plates

Heating plates – series of manual instruments equipped with an aluminum heating plate Teflon-coated (PTFE) and a practical heat-insulated plastic handle. Available in two versions: one with a fixed mechanical thermostat (TF) and one with an adjustable electronic thermoregulator (TE).
The heating plates are available in different shapes and working ranges according to the operatorís requirements.

Available in two versions: one with a fixed mechanical thermostat (TF) and one with an adjustable electronic thermoregulator (TE).

Models:
TP 125
TP 125/45∞
TP 200
TP 300

STANDARD COMPOSITION
– Heating plate with a fork support

ON REQUEST (ACCESSORIES)
-Box or steel case

Gallery