U-Shaped Burner
Booms are used to extend the crude oil burner and gas flare a set distance from an installation to allow the produced hydrocarbons to be flared safely and move the radiated heat away from the installation. The boom is a portable U-shaped truss assembly. The kingpost attaches to the rig structure and is braced with […]
Burner Head
The Apex’s FlareMax Burner is designed for maximum clean burn capability with minimal fall-out. The oil path through the burner is via a 2″ mixing chamber which also allows the passage of solids without causing blockages and subsequent performance problems. The propellant (air) enters the mixing chamber through a series of ports drilled tangentially across […]
Well Test Laboratory
Our Safe Area Portable Well Test Laboratory is purpose-built for accurate data acquisition and well production analysis in non-hazardous environments. Designed to serve as a fully functional office, workshop, and storage facility, the lab is constructed to A60/DNV 2.7-1 standards, ensuring safety, mobility, and operational efficiency. Applications: Key features include: This self-contained unit delivers everything […]
Vertical Separator
The Apex Vertical Separator is engineered for high-performance separation of liquids from produced gas, particularly suited for wells with low to moderate liquid content. Its compact and lightweight design makes it ideal for operations where space, mobility, and efficiency are key. Capable of handling gas flow rates up to 125 MMSCFD, the unit delivers exceptional […]
Flare Stack
Flare gas stacks, also known as flue gas stacks or exhaust stacks, are tall, cylindrical structures used to discharge waste gases from industrial processes into the atmosphere. In surface well testing, gas flaring is conducted by 40 ft, 60 ft, or 90 ft flare stacks. Flare systems are available in 3”, 4”, 6” & 8” […]
Wellhead Desander
The Apex Petroleum Services Wellhead desander is designed to remove sands and solids present in well effluent. Wellhead desander is the first sand management equipment on the surface where gases and fluids come into contact with surface equipment after X-mass Trees. Cyclonic desander applies centrifugal (axial) and gravitational forces to perform solid separation. Desanders are […]
DAQ System
Apex uses the Smart Hybrid logger, the most advanced and innovative data acquisition logger on the market, combining the best of both worlds: wired and wireless. Smart Hybrid can read analog transmitters, digital transmitters, Coriolis meters, water cut meters, wet gas meters, multiphase meters, flow meters, and more. The logger has redundant channels and a […]
Apex Multitube Steam Heat Exchanger
The Shell and Tube heat exchanger is a non-fired pressure system consisting of two separate pressure chambers (shell chamber and tube chamber). Separated by the internal tube wall, two media flow past one another with such alignment that, if there is a temperature difference, they will mutually exchange heat without mixing in the process. A […]
Indirect-Gas Fired Heater
The Apex Indirect Gas Fired Heater is engineered for safe, efficient, and reliable performance in onshore and offshore oil & gas operations. It features the HBB Inline Fuel Train & PF2100 BMS (Burner Management System). The HBB Inline Fuel Train is designed for on/off applications and arrives onsite preassembled, with double-block, inline gas-rated 6.5 C/I […]
Produced Water Treatment
APEX’s advanced produced water treatment system is designed to efficiently remove oil from produced water during development well testing and clean-up operations. Water produced in these phases often contains stable oily emulsions that require effective treatment prior to safe environmental discharge. Our system utilizes compact, skid-mounted vessels equipped with high-performance oil adsorption filter cartridges. These […]