Products & Services
Apex , Well Testing has developed its own set of fabrication specifications to ensure that equipment used by Apex Petroleum Services, Well Testing meets or exceeds all local requirements. Apex Petroleum Services, Well Testing specifications are primarily based on the following worldwide recognised specifications:
Equipment Design and Fabrication Specifications
- API Spec 6A – Specification for Valves and Wellhead Equipment
- ASME VIII For construction of pressure vessels , Div 1&2
- API RP 14C – Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems on Offshore Production Platforms
- NACE MR-01-75
- Product Specification Level (PSL) 3
- Material Class DD
- Temperature Class P&X (-20° F to +350° F)
Our Services
The Surface Test Tree (STT), also known as the Flowhead, is located directly on top of…
The Apex Petroleum Services Flexible Armored Hose is generally used for 5000, 10,000 psi, and 15,000…
The Data Header is a piping component with several ports along or around its length that…
Inline Surface Safety Valves are installed upstream of the choke manifold to provide quick response valve…
Apex Petroleum Services uses Hydraulic Control Panels to operate the hydraulic actuators fitted to the surface…
Chemical Injection Pumps are air driven piston type pumps used to inject various chemicals into the…
Chokes are throttling valves that allow operators to control the wellstream. They are capable of withstanding…
Water Bath Heaters are designed to heat high-pressure fluids and gas coming from the well or…
A steam heat exchanger consists of a pressurized tank (usually 150 or 350 psi) that contains…
Steam Generators are used to supply steam to parts of the surface test package such as…
The Apex Petroleum Services three-phase horizontal well testing separator is designed to separate and measure the…
The Apex Pressurized Test Tank is used to store produced liquids before they are disposed. It…
The atmospheric tank is used to store produced liquids before disposal. Atmospheric tanks are manufactured for…
Transfer pumps are used to transfer crude oil from the test tanks to a pipeline or…
Diverter Manifolds are used to redirect the well fluids/ gases produced during well testing operations. They…
The Apex Knock Out Pot is engineered to effectively remove entrained liquid droplets from gas streams.…
Piping systems transport well effluent to and between the well, and various process components of the…
Apex Petroleum has designed a number of trailer-mounted packages for use on land. The trailers come…
The tank is designed to allow easy access for multiple valves forming the inlet and outlet…
APEX’s advanced produced water treatment system is designed to efficiently remove oil from produced water during…
The Apex Indirect Gas Fired Heater is engineered for safe, efficient, and reliable performance in onshore…
The Shell and Tube heat exchanger is a non-fired pressure system consisting of two separate pressure…
Apex uses the Smart Hybrid logger, the most advanced and innovative data acquisition logger on the…
The Apex Petroleum Services Wellhead desander is designed to remove sands and solids present in well…
Flare gas stacks, also known as flue gas stacks or exhaust stacks, are tall, cylindrical structures…
The Apex Vertical Separator is engineered for high-performance separation of liquids from produced gas, particularly suited…
Our Safe Area Portable Well Test Laboratory is purpose-built for accurate data acquisition and well production…
The Apex’s FlareMax Burner is designed for maximum clean burn capability with minimal fall-out. The oil…
Booms are used to extend the crude oil burner and gas flare a set distance from…
An Early Production Facility (EPF) is a modularized integrated solution for oil and gas production that…
The Apex Petroleum Services vessel Sand Filter is designed to remove formation sand, frac proppant, and…
The Apex Petroleum Services Wellhead desander is designed to remove sands and solids present in well…
APEX’s debris catcher manifold is engineered to effectively remove drilling solids, formation particles, and proppant-based debris…
The Roxar Multiphase Flow Meter (MPFM) is an extremely robust, reliable, field-proven measurement instrument. The compact,…
Apex’s Metering Solutions offers a comprehensive suite of technologies for single-phase and multiphase flow applications. This…
Apex offers advanced Coriolis meters in a stand-alone, skid-mounted configuration, designed for integration within well testing…
Apex offers a broad range of highly engineered artificial lift equipment, package solutions, and services, including…
Our Environmentally Based Oil and Gas Water Treatment ServicesOur services relate to the treatment of process…
TECHNICAL DETAILS Design Code API 61, NACE MR-01-175 , PSL 3 Service H2S Pressure Rating 5000 – 10000 PSI Material Class For block , Spool , GATE : DD-NL Temperature Class P+U (-20 F to 250 F )
TECHNICAL DETAILS Description Target Block elbow , 3-1/16” 10k BX154 Flange x 3-1/16” 10k BX154 Flange @90 deg elbowc/w Inconel 625 inlayed ring grooves , PSL3 Service H2S Pressure Rating 10000 PSI WP. T.P = 15000 PSI Material Class AISI 4130, 75K MYS, NACE compliant Temperature Class P+U (-20 F to 250 F )